Drinking Fountain Installation Services in Sioux Falls, SD

How Much Does Drinking Fountain Installation Cost in Sioux Falls, SD?

Drinking fountain installation in Sioux Falls, SD costs anywhere from $1,440 to $3,360 on average for one new wall-mounted fountain or bottle filler near existing water and drain lines. The price depends on the unit, whether it's chilled or filtered, the distance to supply, drain and power, wall work, and permit fees.

Do You Install Drinking Fountains in Homes and Commercial Buildings?

Yes, we install drinking fountains and bottle fillers in houses, offices, schools, gyms, warehouses, parks, and other commercial properties.

Do You Service My Area?

Yes, in most cases. Send us the property address and we'll confirm we cover it.

Can You Install a Fountain After Hours or on a Weekend?

Yes, in most cases. Schools and offices often book installs outside occupied hours because the water has to be shut off for part of the job.

How Soon Can You Install a Drinking Fountain?

We can usually schedule the install once the unit is on site. Special-order and outdoor models can take longer to arrive, so check the lead time before picking a date.

What Information Do You Need to Quote a Drinking Fountain Install?

We need the address, the model you want or the type of unit, photos of the wall or spot, and whether there's a sink, restroom, or outlet nearby. Tell us if an old fountain is coming out.

Will I Need to Be There During the Installation?

No, you don't need to be present as long as we have access to the work area and the main or local water shutoff.

Do I Need a Permit to Install a Drinking Fountain?

Yes, in many cases. A like-for-like replacement often doesn't need one, but new water lines, drains, or electrical circuits often do. Your local building department makes the call, and we can usually pull the permit as part of the job.

Can I Have a Fountain Installed if I'm Renting the Space?

Yes, but you'll need written approval from your landlord or property manager first, since the work ties into the building's water and drain lines.

Can You Coordinate With Our Facilities Manager or General Contractor?

Yes, we can work out access, shutoff times, and rough-in locations with your facilities manager, GC, or another authorized representative.

Can I Get a Price Before the Work Begins?

Yes, we confirm the price before we start. If we open the wall and find an issue, like no usable drain line, we talk it through with you before going further.

Does Replacing an Existing Fountain Cost Less Than a New Install?

Yes, a straight swap is usually the cheapest job because the water, drain, and power are already in place. New locations cost more because we have to run lines to them.

How Long Does Drinking Fountain Installation Take?

A direct replacement typically takes us 2 to 4 hours, and a new wall-mounted fountain 4 to 8 hours. Jobs with new pipe runs, a new outlet, or wall finishing can take 1 to 2 days.

Does a Drinking Fountain Need Electricity?

No, a basic non-chilled fountain runs on water pressure alone. Chilled units and most bottle fillers need a grounded GFCI outlet nearby, and some need a dedicated circuit. Tell us where the closest outlet is.

Can You Install a Drinking Fountain Where There's No Plumbing Nearby?

Yes, but we have to run new water and drain lines to the spot. Within 5 to 10 feet of existing lines is simple. Longer runs, finished walls, and floor crossings add cost.

Can You Install a Bottle Filling Station?

Yes, we install surface-mounted, in-wall, and combination fountain and bottle filler units. Let us know whether you want it chilled or filtered, since that changes what we need at the wall.

Can You Add a Bottle Filler to Our Existing Drinking Fountain?

Yes, many fountains take a retrofit bottle filler mounted above the unit. The kit alone typically runs $400 to $1,225, which is less than a new station. Send us the brand and model so we can check the fit.

Can You Replace an Old or Leaking Drinking Fountain?

Yes, we remove the old unit, check the supply stop and drain, and hang the new fountain. If the new model has a different rough-in, we adjust the lines or the wall to match.

Can You Install an Outdoor Drinking Fountain?

Yes, we install outdoor pedestal and wall-mounted fountains and bottle fillers. Most bolt to a concrete pad or an in-ground carrier, and we need a water line and a place for the drain water to go.

Can You Install a Refrigerated Drinking Fountain?

Yes, we install chilled fountains and electric water coolers. They need a grounded GFCI outlet close by and clear space around the vents so the chiller can breathe.

Can You Install a Filtered Drinking Fountain?

Yes, we install fountains and bottle fillers with built-in filters, or add an inline filter to the supply line. Filtered units often need at least 40 psi, so we check your pressure first.

Can You Install a Hi-Lo Drinking Fountain?

Yes, we install hi-lo fountains with one wheelchair-height bowl and one standing-height bowl.

How High Should a Drinking Fountain Be Mounted?

We set the wheelchair-accessible spout at 36 inches or lower and the standing spout at 38 to 43 inches. Fountains for children 12 and under can have the spout at 30 inches or lower.

How Many Drinking Fountains Does Our Building Need?

Plumbing codes set the total by occupancy, and accessibility rules usually call for at least two, one high and one low, or a single hi-lo unit. Your local building official confirms the count, so send us the plans.

Can I Install a Drinking Fountain Myself?

No, we don't recommend it for any unit tied into your water supply. The job means tapping a water line, connecting a drain with a P-trap, and often wiring, and fountain makers call for a licensed plumber.

Can You Install a Drinking Fountain in a House?

Yes, we install fountains and bottle fillers in homes. The easiest spot is a wall shared with a sink or bathroom, where the water and drain lines are already close.

Can You Install a Recessed Drinking Fountain?

Yes, but a recessed unit needs an opening cut and framed in the wall, so it costs more than a surface-mounted fountain. Tell us what the wall is made of and what's on the other side.

How Far Can a Drinking Fountain Stick Out From the Wall?

If the bottom edge sits higher than 27 inches, the unit can stick out no more than 4 inches into a hallway or walkway. Deeper units we recess into the wall or set in an alcove.

Can a Bottle Filler or Water Cooler Replace a Required Drinking Fountain?

No, under ADA rules a bottle filler or water cooler doesn't count as a required fountain. We can add a filler to a fountain, and if only one bowl gets one, we put it on the wheelchair-accessible bowl.

Can You Upgrade Our Fountains to Meet ADA Requirements?

Yes, we can swap a single fountain for a hi-lo unit or add a second unit at the right height. Your local building official decides exactly what applies.

Can You Install a Touchless Bottle Filler?

Yes, we install sensor bottle fillers and can swap push-button units for hands-free ones.

Can You Install a Drinking Fountain With a Pet Bowl?

Yes, many outdoor models offer a pet bowl as an option. It has to be specified when the fountain is ordered, so tell us before the unit is bought.

Can You Move a Drinking Fountain to a Different Spot?

Yes, we can relocate a fountain by extending the water and drain lines, moving the outlet if needed, and capping the old connections. The wall at the old spot will need patching.

Can You Install Fountains in a School or Office During Renovation?

Yes, we can set the carriers and rough-in during framing and hang the units after the walls are finished. Send us the plans and the fountain models.

Can I Buy the Fountain Myself and Have You Install It?

Yes, we can install a unit you've bought. Send us the model number first so we can check its supply, drain, power, and mounting needs.

Will You Need to Shut Off the Water?

Yes, we shut off the water to the line we're tapping while we connect the unit. If there's no local shutoff, part of the building may lose water during that time.

Can an Outdoor Drinking Fountain Be Used in Freezing Weather?

Yes, if it's a frost-resistant model that keeps the valve below the frost line. Standard outdoor units have to be shut off and drained before winter.

What Water Pressure Does a Drinking Fountain Need?

Many fountains and bottle fillers are rated for about 20 to 105 psi, and filtered units often need at least 40 psi. We check your line pressure and add a regulator if it runs above the unit's limit.

Does a Wall-Mounted Drinking Fountain Need a Carrier?

Yes, in most cases. An in-wall carrier holds the unit and the weight of people leaning on it, which drywall alone won't. Tell us what's behind the wall so we can plan the mounting.

Where Does the Water From an Outdoor Fountain Drain?

It usually drains into a gravel-filled sump just outside the paved pad, or into the sanitary sewer if the fountain sits next to a building with sewer lines.

Will the Installation Damage Our Wall?

Yes, in most new installs we open the wall to set the carrier and run lines. A surface-mounted unit covers most of it, but recessed units and relocations need patching and paint.

Do You Haul Away the Old Fountain?

Yes, we can remove and dispose of the old unit as part of the job.

How Often Does a Bottle Filler Filter Need Changing?

Many bottle filler filters are rated for about 3,000 gallons or 12 months, whichever comes first. Cartridges typically cost $40 to $125, and we can change them for you when the filter light turns red.